Mitsubishi Space Gear wheel bolt & nut sizes
The Mitsubishi Space Gear (1995–2000) uses M12x1.5 wheel fixings with a 60° taper or flat seat and a 21mm hex. Check the table below for the exact fixing for your year and wheel type.
Last updated 2 October 2026
Thread
M12x1.5
Seat
60° taper / flat
Hex size
21mm hex
Strength
Class 8
Sizes by year and wheel type
| Image | Model code | Wheel type | Thread | Length | Seat | Hex size | Finish | Strength |
|---|---|---|---|---|---|---|---|---|
| 1995–2000 | ||||||||
| PAO | Steel Wheels | M12x1.5 | – | 60° taper | 21mm hex | Yellow Zinc | Class 8 |
| PAO | Steel & Alloy Wheels | M12x1.5 | 42mm | Head Ø 18 | 14.3mm spline | Zinc | Class 10.9 |
| PAO | Alloy Wheels | M12x1.5 | – | Flat | 21mm hex | Chrome | Class 8 |
A dash in the length column means no length is listed for that fixing. Not sure which wheels you have? Steel wheels usually have a plastic trim cover over them.
Locking wheel keys for the Mitsubishi Space Gear
Lost or damaged your locking wheel key? Find a replacement for your Mitsubishi.
Common questions
What size are Mitsubishi Space Gear wheel bolts?
Mitsubishi Space Gear wheel fixings are M12x1.5 with a 60° taper or flat seat and a 21mm hex.
Do steel and alloy wheels use the same bolts on a Mitsubishi Space Gear?
No. Steel and alloy wheels use different fixings on the Mitsubishi Space Gear. The table above shows which one fits each wheel type.