Mitsubishi CARISMA wheel bolt & nut sizes
The Mitsubishi CARISMA (1995–2001) uses M12x1.5 wheel fixings with a 60° taper or flat seat and a 21mm hex. It has 4 per wheel, so a full set is 16. Check the table below for the exact fixing for your year and wheel type.
Last updated 2 October 2026
Sizes by year and wheel type
| Image | Model code | Wheel type | Thread | Length | Seat | Hex size | Finish | Strength |
|---|---|---|---|---|---|---|---|---|
| 1995–2001 4 per wheel | ||||||||
| DAO | Steel Wheels | M12x1.5 | – | 60° taper | 21mm hex | Yellow Zinc | Class 8 |
| DAO | Steel & Alloy Wheels | M12x1.5 | 42mm | Head Ø 18 | 14.3mm spline | Zinc | Class 10.9 |
| DAO | Alloy Wheels | M12x1.5 | – | Flat | 21mm hex | Chrome | Class 8 |
A dash in the length column means no length is listed for that fixing. Not sure which wheels you have? Steel wheels usually have a plastic trim cover over them.
Locking wheel keys for the Mitsubishi CARISMA
Lost or damaged your locking wheel key? Find a replacement for your Mitsubishi.
Common questions
What size are Mitsubishi CARISMA wheel bolts?
Mitsubishi CARISMA wheel fixings are M12x1.5 with a 60° taper or flat seat and a 21mm hex.
Do steel and alloy wheels use the same bolts on a Mitsubishi CARISMA?
No. Steel and alloy wheels use different fixings on the Mitsubishi CARISMA. The table above shows which one fits each wheel type.
How many wheel bolts does a Mitsubishi CARISMA need?
4 per wheel, so 16 for a full set of four wheels.