Toyota Corolla wheel bolt & nut sizes
The Toyota Corolla (1966–2007) uses M12x1.5 wheel fixings with a 60° taper or flat seat and a 21mm hex. Check the table below for the exact fixing for your year and wheel type.
Last updated 2 October 2026
Thread
M12x1.5
Seat
60° taper / flat
Hex size
21mm hex
Strength
Class 8
Sizes by year and wheel type
| Image | Model code | Wheel type | Thread | Length | Seat | Hex size | Finish | Strength |
|---|---|---|---|---|---|---|---|---|
| 1966–2007 4 or 5 per wheel: Older 4-stud, later 5-stud | ||||||||
| E10, E11, E12 | Steel Wheels | M12x1.5 | – | 60° taper | 21mm hex | Yellow Zinc | Class 8 |
| E10, E11, E12 | Alloy Wheels | M12x1.5 | – | Flat | 21mm hex | Chrome | Class 8 |
A dash in the length column means no length is listed for that fixing. Not sure which wheels you have? Steel wheels usually have a plastic trim cover over them.
Locking wheel keys for the Toyota Corolla
Lost or damaged your locking wheel key? Find a replacement for your Toyota.
Common questions
What size are Toyota Corolla wheel bolts?
Toyota Corolla wheel fixings are M12x1.5 with a 60° taper or flat seat and a 21mm hex.
Do steel and alloy wheels use the same bolts on a Toyota Corolla?
No. Steel and alloy wheels use different fixings on the Toyota Corolla. The table above shows which one fits each wheel type.