Peugeot Partner wheel bolt & nut sizes
The Peugeot Partner (1996 on) uses M12x1.25 wheel fixings with a flat or 60° taper seat and a 17mm hex or 19mm hex. Check the table below for the exact fixing for your year and wheel type.
Last updated 2 October 2026
Thread
M12x1.25
Seat
flat / 60° taper
Hex size
17mm hex / 19mm hex
Strength
Class 10.9 / Class 10.9 (300)
Sizes by year and wheel type
| Image | Model code | Wheel type | Thread | Length | Seat | Hex size | Finish | Strength |
|---|---|---|---|---|---|---|---|---|
| 1996–02 4 per wheel | ||||||||
| Ranch Mod 1 | Alloy Wheels | M12x1.25 | 33mm | Flat | 17mm hex | Delta KL100 | Class 10.9 |
| Ranch Mod 1 | Steel Wheels | M12x1.25 | 26mm | 60° taper | 19mm hex | Zinc | Class 10.9 |
| Ranch Mod 1 | Steel Wheels | M12x1.25 | 26mm | 60° taper | 17mm hex | Delta KL100 | Class 10.9 (300) |
| 2002–08 4 per wheel | ||||||||
|
| Mod 2 | Alloy Wheels | M12x1.25 | 33mm | Flat | 17mm hex | Delta KL100 | Class 10.9 |
|
| Mod 2 | Steel Wheels | M12x1.25 | 26mm | 60° taper | 19mm hex | Zinc | Class 10.9 |
| 2008 on 4 or 5 per wheel: 4-stud standard, some heavier versions 5-stud | ||||||||
|
| Tepee Mod 3 | Alloy Wheels | M12x1.25 | 26mm | 60° taper | 17mm hex | Delta KL100 | Class 10.9 |
| Tepee Mod 3 | Steel Wheels | M12x1.25 | 26mm | 60° taper | 17mm hex | Delta KL100 | Class 10.9 |
A dash in the length column means no length is listed for that fixing. Not sure which wheels you have? Steel wheels usually have a plastic trim cover over them.
Locking wheel keys for the Peugeot Partner
Lost or damaged your locking wheel key? Find a replacement for your Peugeot.
Common questions
What size are Peugeot Partner wheel bolts?
Peugeot Partner wheel fixings are M12x1.25 with a flat or 60° taper seat and a 17mm hex or 19mm hex.
Do steel and alloy wheels use the same bolts on a Peugeot Partner?
No. Steel and alloy wheels use different fixings on the Peugeot Partner. The table above shows which one fits each wheel type.