Ford Focus wheel bolt & nut sizes
The Ford Focus (1998 on) uses M12x1.5 wheel fixings with a 60° taper seat and a 19mm hex. Check the table below for the exact fixing for your year and wheel type.
Last updated 2 October 2026
Thread
M12x1.5
Seat
60° taper
Hex size
19mm hex
Strength
Class 10
Sizes by year and wheel type
| Image | Model code | Wheel type | Thread | Length | Seat | Hex size | Finish | Strength |
|---|---|---|---|---|---|---|---|---|
| 1998–2012 4 or 5 per wheel: Mk1 (1998-2004) 4-stud, Mk2 onwards 5-stud | ||||||||
| DA3, DB3, DYB, DAW, DBW | Alloy Wheels with Centre Cover | M12x1.5 | – | 60° taper | 19mm hex | Zinc Nickel | Class 10 |
| DAW, DA3, DYB | Steel Wheels | M12x1.5 | – | 60° taper | 19mm hex | Delta KL100 | Class 10 |
| DAW, DA3, DYB | Steel & Alloy Wheels | M12x1.5 | 42mm | Head Ø 18 | 13mm spline | Zinc | Class 10.9 |
| DA3, DB3, DYB, DAW, DBW | Alloy Wheels | M12x1.5 | – | 60° taper | 19mm hex | Zinc Nickel + SS | Class 10 |
| 2012 on 5 per wheel | ||||||||
|
| DA3, DB3, DYB, DAW, DBW | Alloy Wheels with Centre Cover | M12x1.5 | – | 60° taper | 19mm hex | Zinc Nickel | Class 10 |
|
| DAW, DA3, DYB | Steel Wheels | M12x1.5 | – | 60° taper | 19mm hex | Delta KL100 | Class 10 |
|
| DAW, DA3, DYB | Steel & Alloy Wheels | M12x1.5 | 42mm | Head Ø 18 | 13mm spline | Zinc | Class 10.9 |
| All from 2012 | Alloy Wheels | M12x1.5 | – | 60° taper | 19mm hex | Zinc Nickel + SS | Class 10 |
A dash in the length column means no length is listed for that fixing. Not sure which wheels you have? Steel wheels usually have a plastic trim cover over them.
Locking wheel keys for the Ford Focus
Lost or damaged your locking wheel key? Find a replacement for your Ford.
Common questions
What size are Ford Focus wheel bolts?
Ford Focus wheel fixings are M12x1.5 with a 60° taper seat and a 19mm hex.
Do steel and alloy wheels use the same bolts on a Ford Focus?
The thread, seat and hex size are the same. The finish differs: Delta KL100 for steel wheels, Zinc Nickel / Zinc Nickel + SS for alloys.